added Tubes STEP and SVG files

suppression d'un trou inutile dans M101
restauration du boulon de roue
nettoyages

.gitignore

@@ -1,7 +1,6 @@
 *.FCStd1
 _local
 __pycache__/
-/dist/
 /tubes/deprec/
 /Images/vue d'ensemble provisoire.svg
 /roues/ROU101B.FCStd

README.md

@@ -7,34 +7,30 @@ sur la base du travail de Macéo
 --- attention ---   
 fait avec FreeCad v0.21.2, peut-être pas lisible correctement avec les versions antérieures  
   
-état au **05/03/2025** - 08h30  
+état au **26/04/2025** - 11h30  
 
-suite discussion du 3/5/25  
+les fichiers STEP des tubes sont dans le répertoire dist/STEP/tubes  
+les fichiers SVG des tubes sont dans le répertoire tubes  
 
 ### Dimensions:  
-- élargissement de 1 cm en longueur et largeur pour donner du jeu  
-    
-### Cales latérales:  
-- reprise des équerres CHO17 pour les quatre côtés en lieu et place des tubes du croquis de Gaetan  
-- un trou central permet de les remplacer par un bout de tube vertical en alternative (mais fixé par une seule vis)  
+- timon raccourci à 61 cm en longueur  
 
 ### Roulette frontale:  
 - la roulette n'est plus celle du Vhélio mais une roulette de roller junior de 63mm facile à trouver (axe 6mm)  
 - on laisse un peu d'inclinaison vers l'avant pour faciliter le dégagement de la roulette en position roulage  
 - la remorque serait exactement à l'horizontale pour une taille de roulette de 80mm  
-- le deuxième montant M101 accolé au premier est supprimé. L'équerre CHO17 est identique aux trois autres. Elle est centrée donc la roue n'est pas dans l'axe de la remorque.  
+- un deuxième montant M101 est ajouté, la roulette est recentrée. Les M101 sont raccourcis. L'équerre CHO17 est identique aux trois autres.   
   
 ### Timon:  
-- l'équerre de fixation est positionnée pour un timon soit horizontal (traction) soit vertical (caddy). Si on veut un timon oblique il suffit de retourner l'équerre. Le timon L102 dispose déjà du trou nécessaire  
-- le timon a été légèrement avancé (modification du perçage L101) pour pouvoir placer la vis tête fraisée plus loin de l'axe sans buter dans les vis verticales (meilleure tenue mécanique)  
-- une poignee de timon provisoire a été faite avec une équerre CHO17 et un troisième tube M101  
+- l'équerre de fixation est retournée et positionnée pour un timon soit horizontal (traction) soit vertical (caddy). Le timon L102 dispose des deux trous nécessaires.  
+- le timon a été légèrement avancé (modification du perçage L101).  
+- la poignee de timon provisoire a été supprimée.  
   
     
 ## reste à faire :   
 
-- extrémité timon définitive (attache au vélo)   
 - vérifier que les fixations des roues en M8 TH ne bloquent pas le roulement.  
   
 ### GIT :  
-<https://git.vhelio.org/christian/Remorque_PM_v0>
+<https://git.vhelio.org/christian/Remorque_PM_v0/src/branch/reqs-greg>
   

dist/STEP/tubes/L102.step

@@ -0,0 +1,805 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME('Open CASCADE Shape Model','2025-04-26T09:47:55',('Author'),(
+    ''),'Open CASCADE STEP processor 7.6','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',
+  'automotive_design',2000,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('L102','L102','',(#8));
+#8 = PRODUCT_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#769);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.,0.,0.));
+#13 = DIRECTION('',(0.,0.,1.));
+#14 = DIRECTION('',(1.,0.,-0.));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#90,#154,#212,#270,#320,#345,#370,#395,#440,
+    #465,#490,#515,#546,#596,#646,#667,#684,#701,#718,#735,#752));
+#17 = ADVANCED_FACE('',(#18,#52,#63,#74),#85,.T.);
+#18 = FACE_BOUND('',#19,.T.);
+#19 = EDGE_LOOP('',(#20,#30,#38,#46));
+#20 = ORIENTED_EDGE('',*,*,#21,.T.);
+#21 = EDGE_CURVE('',#22,#24,#26,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(-12.5,-6.E-15,12.5));
+#24 = VERTEX_POINT('',#25);
+#25 = CARTESIAN_POINT('',(-12.5,-610.,12.5));
+#26 = LINE('',#27,#28);
+#27 = CARTESIAN_POINT('',(-12.5,-2.78E-15,12.5));
+#28 = VECTOR('',#29,1.);
+#29 = DIRECTION('',(0.,-1.,-2.2E-16));
+#30 = ORIENTED_EDGE('',*,*,#31,.T.);
+#31 = EDGE_CURVE('',#24,#32,#34,.T.);
+#32 = VERTEX_POINT('',#33);
+#33 = CARTESIAN_POINT('',(12.5,-610.,12.5));
+#34 = LINE('',#35,#36);
+#35 = CARTESIAN_POINT('',(-12.5,-610.,12.5));
+#36 = VECTOR('',#37,1.);
+#37 = DIRECTION('',(1.,0.,0.));
+#38 = ORIENTED_EDGE('',*,*,#39,.F.);
+#39 = EDGE_CURVE('',#40,#32,#42,.T.);
+#40 = VERTEX_POINT('',#41);
+#41 = CARTESIAN_POINT('',(12.5,-6.E-15,12.5));
+#42 = LINE('',#43,#44);
+#43 = CARTESIAN_POINT('',(12.5,-2.78E-15,12.5));
+#44 = VECTOR('',#45,1.);
+#45 = DIRECTION('',(0.,-1.,-2.2E-16));
+#46 = ORIENTED_EDGE('',*,*,#47,.F.);
+#47 = EDGE_CURVE('',#22,#40,#48,.T.);
+#48 = LINE('',#49,#50);
+#49 = CARTESIAN_POINT('',(-12.5,-2.78E-15,12.5));
+#50 = VECTOR('',#51,1.);
+#51 = DIRECTION('',(1.,0.,0.));
+#52 = FACE_BOUND('',#53,.T.);
+#53 = EDGE_LOOP('',(#54));
+#54 = ORIENTED_EDGE('',*,*,#55,.F.);
+#55 = EDGE_CURVE('',#56,#56,#58,.T.);
+#56 = VERTEX_POINT('',#57);
+#57 = CARTESIAN_POINT('',(-1.33E-13,-600.75,12.5));
+#58 = CIRCLE('',#59,3.25);
+#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62);
+#60 = CARTESIAN_POINT('',(-1.3267E-13,-597.5,12.5));
+#61 = DIRECTION('',(0.,0.,1.));
+#62 = DIRECTION('',(-2.2E-16,-1.,0.));
+#63 = FACE_BOUND('',#64,.T.);
+#64 = EDGE_LOOP('',(#65));
+#65 = ORIENTED_EDGE('',*,*,#66,.F.);
+#66 = EDGE_CURVE('',#67,#67,#69,.T.);
+#67 = VERTEX_POINT('',#68);
+#68 = CARTESIAN_POINT('',(-1.22E-13,-550.75,12.5));
+#69 = CIRCLE('',#70,3.25);
+#70 = AXIS2_PLACEMENT_3D('',#71,#72,#73);
+#71 = CARTESIAN_POINT('',(-1.2157E-13,-547.5,12.5));
+#72 = DIRECTION('',(0.,0.,1.));
+#73 = DIRECTION('',(-2.2E-16,-1.,0.));
+#74 = FACE_BOUND('',#75,.T.);
+#75 = EDGE_LOOP('',(#76));
+#76 = ORIENTED_EDGE('',*,*,#77,.F.);
+#77 = EDGE_CURVE('',#78,#78,#80,.T.);
+#78 = VERTEX_POINT('',#79);
+#79 = CARTESIAN_POINT('',(-1.06E-13,-475.75,12.5));
+#80 = CIRCLE('',#81,3.25);
+#81 = AXIS2_PLACEMENT_3D('',#82,#83,#84);
+#82 = CARTESIAN_POINT('',(-1.0492E-13,-472.5,12.5));
+#83 = DIRECTION('',(0.,0.,1.));
+#84 = DIRECTION('',(-2.2E-16,-1.,0.));
+#85 = PLANE('',#86);
+#86 = AXIS2_PLACEMENT_3D('',#87,#88,#89);
+#87 = CARTESIAN_POINT('',(-12.5,-2.78E-15,12.5));
+#88 = DIRECTION('',(0.,-2.2E-16,1.));
+#89 = DIRECTION('',(1.,0.,0.));
+#90 = ADVANCED_FACE('',(#91,#116,#127,#138),#149,.T.);
+#91 = FACE_BOUND('',#92,.T.);
+#92 = EDGE_LOOP('',(#93,#103,#109,#110));
+#93 = ORIENTED_EDGE('',*,*,#94,.T.);
+#94 = EDGE_CURVE('',#95,#97,#99,.T.);
+#95 = VERTEX_POINT('',#96);
+#96 = CARTESIAN_POINT('',(-12.5,6.E-15,-12.5));
+#97 = VERTEX_POINT('',#98);
+#98 = CARTESIAN_POINT('',(-12.5,-610.,-12.5));
+#99 = LINE('',#100,#101);
+#100 = CARTESIAN_POINT('',(-12.5,2.78E-15,-12.5));
+#101 = VECTOR('',#102,1.);
+#102 = DIRECTION('',(0.,-1.,-2.2E-16));
+#103 = ORIENTED_EDGE('',*,*,#104,.T.);
+#104 = EDGE_CURVE('',#97,#24,#105,.T.);
+#105 = LINE('',#106,#107);
+#106 = CARTESIAN_POINT('',(-12.5,-610.,-12.5));
+#107 = VECTOR('',#108,1.);
+#108 = DIRECTION('',(0.,-2.2E-16,1.));
+#109 = ORIENTED_EDGE('',*,*,#21,.F.);
+#110 = ORIENTED_EDGE('',*,*,#111,.F.);
+#111 = EDGE_CURVE('',#95,#22,#112,.T.);
+#112 = LINE('',#113,#114);
+#113 = CARTESIAN_POINT('',(-12.5,2.78E-15,-12.5));
+#114 = VECTOR('',#115,1.);
+#115 = DIRECTION('',(0.,-2.2E-16,1.));
+#116 = FACE_BOUND('',#117,.T.);
+#117 = EDGE_LOOP('',(#118));
+#118 = ORIENTED_EDGE('',*,*,#119,.F.);
+#119 = EDGE_CURVE('',#120,#120,#122,.T.);
+#120 = VERTEX_POINT('',#121);
+#121 = CARTESIAN_POINT('',(-12.5,-140.75,-3.E-15));
+#122 = CIRCLE('',#123,3.25);
+#123 = AXIS2_PLACEMENT_3D('',#124,#125,#126);
+#124 = CARTESIAN_POINT('',(-12.5,-137.5,2.776E-14));
+#125 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#126 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#127 = FACE_BOUND('',#128,.T.);
+#128 = EDGE_LOOP('',(#129));
+#129 = ORIENTED_EDGE('',*,*,#130,.F.);
+#130 = EDGE_CURVE('',#131,#131,#133,.T.);
+#131 = VERTEX_POINT('',#132);
+#132 = CARTESIAN_POINT('',(-12.5,-65.75,-3.E-15));
+#133 = CIRCLE('',#134,3.25);
+#134 = AXIS2_PLACEMENT_3D('',#135,#136,#137);
+#135 = CARTESIAN_POINT('',(-12.5,-62.5,1.11E-14));
+#136 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#137 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#138 = FACE_BOUND('',#139,.T.);
+#139 = EDGE_LOOP('',(#140));
+#140 = ORIENTED_EDGE('',*,*,#141,.F.);
+#141 = EDGE_CURVE('',#142,#142,#144,.T.);
+#142 = VERTEX_POINT('',#143);
+#143 = CARTESIAN_POINT('',(-12.5,-15.75,-3.E-15));
+#144 = CIRCLE('',#145,3.25);
+#145 = AXIS2_PLACEMENT_3D('',#146,#147,#148);
+#146 = CARTESIAN_POINT('',(-12.5,-12.5,0.));
+#147 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#148 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#149 = PLANE('',#150);
+#150 = AXIS2_PLACEMENT_3D('',#151,#152,#153);
+#151 = CARTESIAN_POINT('',(-12.5,2.78E-15,-12.5));
+#152 = DIRECTION('',(-1.,0.,0.));
+#153 = DIRECTION('',(0.,-2.2E-16,1.));
+#154 = ADVANCED_FACE('',(#155,#173),#207,.T.);
+#155 = FACE_BOUND('',#156,.T.);
+#156 = EDGE_LOOP('',(#157,#158,#166,#172));
+#157 = ORIENTED_EDGE('',*,*,#47,.T.);
+#158 = ORIENTED_EDGE('',*,*,#159,.T.);
+#159 = EDGE_CURVE('',#40,#160,#162,.T.);
+#160 = VERTEX_POINT('',#161);
+#161 = CARTESIAN_POINT('',(12.5,6.E-15,-12.5));
+#162 = LINE('',#163,#164);
+#163 = CARTESIAN_POINT('',(12.5,-2.78E-15,12.5));
+#164 = VECTOR('',#165,1.);
+#165 = DIRECTION('',(0.,2.2E-16,-1.));
+#166 = ORIENTED_EDGE('',*,*,#167,.T.);
+#167 = EDGE_CURVE('',#160,#95,#168,.T.);
+#168 = LINE('',#169,#170);
+#169 = CARTESIAN_POINT('',(12.5,2.78E-15,-12.5));
+#170 = VECTOR('',#171,1.);
+#171 = DIRECTION('',(-1.,0.,0.));
+#172 = ORIENTED_EDGE('',*,*,#111,.T.);
+#173 = FACE_BOUND('',#174,.F.);
+#174 = EDGE_LOOP('',(#175,#185,#193,#201));
+#175 = ORIENTED_EDGE('',*,*,#176,.T.);
+#176 = EDGE_CURVE('',#177,#179,#181,.T.);
+#177 = VERTEX_POINT('',#178);
+#178 = CARTESIAN_POINT('',(-10.5,-5.E-15,10.5));
+#179 = VERTEX_POINT('',#180);
+#180 = CARTESIAN_POINT('',(10.5,-5.E-15,10.5));
+#181 = LINE('',#182,#183);
+#182 = CARTESIAN_POINT('',(-10.5,-2.33E-15,10.5));
+#183 = VECTOR('',#184,1.);
+#184 = DIRECTION('',(1.,0.,0.));
+#185 = ORIENTED_EDGE('',*,*,#186,.T.);
+#186 = EDGE_CURVE('',#179,#187,#189,.T.);
+#187 = VERTEX_POINT('',#188);
+#188 = CARTESIAN_POINT('',(10.5,5.E-15,-10.5));
+#189 = LINE('',#190,#191);
+#190 = CARTESIAN_POINT('',(10.5,-2.33E-15,10.5));
+#191 = VECTOR('',#192,1.);
+#192 = DIRECTION('',(0.,2.2E-16,-1.));
+#193 = ORIENTED_EDGE('',*,*,#194,.T.);
+#194 = EDGE_CURVE('',#187,#195,#197,.T.);
+#195 = VERTEX_POINT('',#196);
+#196 = CARTESIAN_POINT('',(-10.5,5.E-15,-10.5));
+#197 = LINE('',#198,#199);
+#198 = CARTESIAN_POINT('',(10.5,2.33E-15,-10.5));
+#199 = VECTOR('',#200,1.);
+#200 = DIRECTION('',(-1.,0.,0.));
+#201 = ORIENTED_EDGE('',*,*,#202,.T.);
+#202 = EDGE_CURVE('',#195,#177,#203,.T.);
+#203 = LINE('',#204,#205);
+#204 = CARTESIAN_POINT('',(-10.5,2.33E-15,-10.5));
+#205 = VECTOR('',#206,1.);
+#206 = DIRECTION('',(0.,-2.2E-16,1.));
+#207 = PLANE('',#208);
+#208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);
+#209 = CARTESIAN_POINT('',(0.,0.,1.24E-15));
+#210 = DIRECTION('',(0.,1.,4.4E-16));
+#211 = DIRECTION('',(0.,-4.4E-16,1.));
+#212 = ADVANCED_FACE('',(#213,#231),#265,.F.);
+#213 = FACE_BOUND('',#214,.F.);
+#214 = EDGE_LOOP('',(#215,#216,#224,#230));
+#215 = ORIENTED_EDGE('',*,*,#31,.T.);
+#216 = ORIENTED_EDGE('',*,*,#217,.T.);
+#217 = EDGE_CURVE('',#32,#218,#220,.T.);
+#218 = VERTEX_POINT('',#219);
+#219 = CARTESIAN_POINT('',(12.5,-610.,-12.5));
+#220 = LINE('',#221,#222);
+#221 = CARTESIAN_POINT('',(12.5,-610.,12.5));
+#222 = VECTOR('',#223,1.);
+#223 = DIRECTION('',(0.,2.2E-16,-1.));
+#224 = ORIENTED_EDGE('',*,*,#225,.T.);
+#225 = EDGE_CURVE('',#218,#97,#226,.T.);
+#226 = LINE('',#227,#228);
+#227 = CARTESIAN_POINT('',(12.5,-610.,-12.5));
+#228 = VECTOR('',#229,1.);
+#229 = DIRECTION('',(-1.,0.,0.));
+#230 = ORIENTED_EDGE('',*,*,#104,.T.);
+#231 = FACE_BOUND('',#232,.T.);
+#232 = EDGE_LOOP('',(#233,#243,#251,#259));
+#233 = ORIENTED_EDGE('',*,*,#234,.T.);
+#234 = EDGE_CURVE('',#235,#237,#239,.T.);
+#235 = VERTEX_POINT('',#236);
+#236 = CARTESIAN_POINT('',(-10.5,-610.,10.5));
+#237 = VERTEX_POINT('',#238);
+#238 = CARTESIAN_POINT('',(10.5,-610.,10.5));
+#239 = LINE('',#240,#241);
+#240 = CARTESIAN_POINT('',(-10.5,-610.,10.5));
+#241 = VECTOR('',#242,1.);
+#242 = DIRECTION('',(1.,0.,0.));
+#243 = ORIENTED_EDGE('',*,*,#244,.T.);
+#244 = EDGE_CURVE('',#237,#245,#247,.T.);
+#245 = VERTEX_POINT('',#246);
+#246 = CARTESIAN_POINT('',(10.5,-610.,-10.5));
+#247 = LINE('',#248,#249);
+#248 = CARTESIAN_POINT('',(10.5,-610.,10.5));
+#249 = VECTOR('',#250,1.);
+#250 = DIRECTION('',(0.,2.2E-16,-1.));
+#251 = ORIENTED_EDGE('',*,*,#252,.T.);
+#252 = EDGE_CURVE('',#245,#253,#255,.T.);
+#253 = VERTEX_POINT('',#254);
+#254 = CARTESIAN_POINT('',(-10.5,-610.,-10.5));
+#255 = LINE('',#256,#257);
+#256 = CARTESIAN_POINT('',(10.5,-610.,-10.5));
+#257 = VECTOR('',#258,1.);
+#258 = DIRECTION('',(-1.,0.,0.));
+#259 = ORIENTED_EDGE('',*,*,#260,.T.);
+#260 = EDGE_CURVE('',#253,#235,#261,.T.);
+#261 = LINE('',#262,#263);
+#262 = CARTESIAN_POINT('',(-10.5,-610.,-10.5));
+#263 = VECTOR('',#264,1.);
+#264 = DIRECTION('',(0.,-2.2E-16,1.));
+#265 = PLANE('',#266);
+#266 = AXIS2_PLACEMENT_3D('',#267,#268,#269);
+#267 = CARTESIAN_POINT('',(0.,-610.,-2.273736754432E-13));
+#268 = DIRECTION('',(0.,1.,4.4E-16));
+#269 = DIRECTION('',(0.,-4.4E-16,1.));
+#270 = ADVANCED_FACE('',(#271,#282,#293,#304),#315,.T.);
+#271 = FACE_BOUND('',#272,.T.);
+#272 = EDGE_LOOP('',(#273,#274,#275,#281));
+#273 = ORIENTED_EDGE('',*,*,#39,.T.);
+#274 = ORIENTED_EDGE('',*,*,#217,.T.);
+#275 = ORIENTED_EDGE('',*,*,#276,.F.);
+#276 = EDGE_CURVE('',#160,#218,#277,.T.);
+#277 = LINE('',#278,#279);
+#278 = CARTESIAN_POINT('',(12.5,2.78E-15,-12.5));
+#279 = VECTOR('',#280,1.);
+#280 = DIRECTION('',(0.,-1.,-2.2E-16));
+#281 = ORIENTED_EDGE('',*,*,#159,.F.);
+#282 = FACE_BOUND('',#283,.T.);
+#283 = EDGE_LOOP('',(#284));
+#284 = ORIENTED_EDGE('',*,*,#285,.T.);
+#285 = EDGE_CURVE('',#286,#286,#288,.T.);
+#286 = VERTEX_POINT('',#287);
+#287 = CARTESIAN_POINT('',(12.5,-140.75,3.E-15));
+#288 = CIRCLE('',#289,3.25);
+#289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);
+#290 = CARTESIAN_POINT('',(12.5,-137.5,3.331E-14));
+#291 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#292 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#293 = FACE_BOUND('',#294,.T.);
+#294 = EDGE_LOOP('',(#295));
+#295 = ORIENTED_EDGE('',*,*,#296,.T.);
+#296 = EDGE_CURVE('',#297,#297,#299,.T.);
+#297 = VERTEX_POINT('',#298);
+#298 = CARTESIAN_POINT('',(12.5,-65.75,3.E-15));
+#299 = CIRCLE('',#300,3.25);
+#300 = AXIS2_PLACEMENT_3D('',#301,#302,#303);
+#301 = CARTESIAN_POINT('',(12.5,-62.5,1.665E-14));
+#302 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#303 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#304 = FACE_BOUND('',#305,.T.);
+#305 = EDGE_LOOP('',(#306));
+#306 = ORIENTED_EDGE('',*,*,#307,.T.);
+#307 = EDGE_CURVE('',#308,#308,#310,.T.);
+#308 = VERTEX_POINT('',#309);
+#309 = CARTESIAN_POINT('',(12.5,-15.75,3.E-15));
+#310 = CIRCLE('',#311,3.25);
+#311 = AXIS2_PLACEMENT_3D('',#312,#313,#314);
+#312 = CARTESIAN_POINT('',(12.5,-12.5,5.55E-15));
+#313 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#314 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#315 = PLANE('',#316);
+#316 = AXIS2_PLACEMENT_3D('',#317,#318,#319);
+#317 = CARTESIAN_POINT('',(12.5,-2.78E-15,12.5));
+#318 = DIRECTION('',(1.,0.,0.));
+#319 = DIRECTION('',(0.,2.2E-16,-1.));
+#320 = ADVANCED_FACE('',(#321),#340,.F.);
+#321 = FACE_BOUND('',#322,.F.);
+#322 = EDGE_LOOP('',(#323,#324,#332,#339));
+#323 = ORIENTED_EDGE('',*,*,#55,.F.);
+#324 = ORIENTED_EDGE('',*,*,#325,.T.);
+#325 = EDGE_CURVE('',#56,#326,#328,.T.);
+#326 = VERTEX_POINT('',#327);
+#327 = CARTESIAN_POINT('',(-1.33E-13,-600.75,10.5));
+#328 = LINE('',#329,#330);
+#329 = CARTESIAN_POINT('',(-1.3339E-13,-600.75,617.13396843797));
+#330 = VECTOR('',#331,1.);
+#331 = DIRECTION('',(0.,0.,-1.));
+#332 = ORIENTED_EDGE('',*,*,#333,.T.);
+#333 = EDGE_CURVE('',#326,#326,#334,.T.);
+#334 = CIRCLE('',#335,3.25);
+#335 = AXIS2_PLACEMENT_3D('',#336,#337,#338);
+#336 = CARTESIAN_POINT('',(-1.3267E-13,-597.5,10.5));
+#337 = DIRECTION('',(0.,0.,1.));
+#338 = DIRECTION('',(-2.2E-16,-1.,0.));
+#339 = ORIENTED_EDGE('',*,*,#325,.F.);
+#340 = CYLINDRICAL_SURFACE('',#341,3.25);
+#341 = AXIS2_PLACEMENT_3D('',#342,#343,#344);
+#342 = CARTESIAN_POINT('',(-1.3267E-13,-597.5,617.13396843797));
+#343 = DIRECTION('',(0.,0.,1.));
+#344 = DIRECTION('',(-2.2E-16,-1.,0.));
+#345 = ADVANCED_FACE('',(#346),#365,.F.);
+#346 = FACE_BOUND('',#347,.F.);
+#347 = EDGE_LOOP('',(#348,#349,#357,#364));
+#348 = ORIENTED_EDGE('',*,*,#66,.F.);
+#349 = ORIENTED_EDGE('',*,*,#350,.T.);
+#350 = EDGE_CURVE('',#67,#351,#353,.T.);
+#351 = VERTEX_POINT('',#352);
+#352 = CARTESIAN_POINT('',(-1.22E-13,-550.75,10.5));
+#353 = LINE('',#354,#355);
+#354 = CARTESIAN_POINT('',(-1.2229E-13,-550.75,617.13396843797));
+#355 = VECTOR('',#356,1.);
+#356 = DIRECTION('',(0.,0.,-1.));
+#357 = ORIENTED_EDGE('',*,*,#358,.T.);
+#358 = EDGE_CURVE('',#351,#351,#359,.T.);
+#359 = CIRCLE('',#360,3.25);
+#360 = AXIS2_PLACEMENT_3D('',#361,#362,#363);
+#361 = CARTESIAN_POINT('',(-1.2157E-13,-547.5,10.5));
+#362 = DIRECTION('',(0.,0.,1.));
+#363 = DIRECTION('',(-2.2E-16,-1.,0.));
+#364 = ORIENTED_EDGE('',*,*,#350,.F.);
+#365 = CYLINDRICAL_SURFACE('',#366,3.25);
+#366 = AXIS2_PLACEMENT_3D('',#367,#368,#369);
+#367 = CARTESIAN_POINT('',(-1.2157E-13,-547.5,617.13396843797));
+#368 = DIRECTION('',(0.,0.,1.));
+#369 = DIRECTION('',(-2.2E-16,-1.,0.));
+#370 = ADVANCED_FACE('',(#371),#390,.F.);
+#371 = FACE_BOUND('',#372,.F.);
+#372 = EDGE_LOOP('',(#373,#374,#382,#389));
+#373 = ORIENTED_EDGE('',*,*,#77,.F.);
+#374 = ORIENTED_EDGE('',*,*,#375,.T.);
+#375 = EDGE_CURVE('',#78,#376,#378,.T.);
+#376 = VERTEX_POINT('',#377);
+#377 = CARTESIAN_POINT('',(-1.06E-13,-475.75,10.5));
+#378 = LINE('',#379,#380);
+#379 = CARTESIAN_POINT('',(-1.0564E-13,-475.75,617.13396843797));
+#380 = VECTOR('',#381,1.);
+#381 = DIRECTION('',(0.,0.,-1.));
+#382 = ORIENTED_EDGE('',*,*,#383,.T.);
+#383 = EDGE_CURVE('',#376,#376,#384,.T.);
+#384 = CIRCLE('',#385,3.25);
+#385 = AXIS2_PLACEMENT_3D('',#386,#387,#388);
+#386 = CARTESIAN_POINT('',(-1.0492E-13,-472.5,10.5));
+#387 = DIRECTION('',(0.,0.,1.));
+#388 = DIRECTION('',(-2.2E-16,-1.,0.));
+#389 = ORIENTED_EDGE('',*,*,#375,.F.);
+#390 = CYLINDRICAL_SURFACE('',#391,3.25);
+#391 = AXIS2_PLACEMENT_3D('',#392,#393,#394);
+#392 = CARTESIAN_POINT('',(-1.0492E-13,-472.5,617.13396843797));
+#393 = DIRECTION('',(0.,0.,1.));
+#394 = DIRECTION('',(-2.2E-16,-1.,0.));
+#395 = ADVANCED_FACE('',(#396,#402,#413,#424),#435,.T.);
+#396 = FACE_BOUND('',#397,.T.);
+#397 = EDGE_LOOP('',(#398,#399,#400,#401));
+#398 = ORIENTED_EDGE('',*,*,#276,.T.);
+#399 = ORIENTED_EDGE('',*,*,#225,.T.);
+#400 = ORIENTED_EDGE('',*,*,#94,.F.);
+#401 = ORIENTED_EDGE('',*,*,#167,.F.);
+#402 = FACE_BOUND('',#403,.T.);
+#403 = EDGE_LOOP('',(#404));
+#404 = ORIENTED_EDGE('',*,*,#405,.T.);
+#405 = EDGE_CURVE('',#406,#406,#408,.T.);
+#406 = VERTEX_POINT('',#407);
+#407 = CARTESIAN_POINT('',(-1.33E-13,-600.75,-12.5));
+#408 = CIRCLE('',#409,3.25);
+#409 = AXIS2_PLACEMENT_3D('',#410,#411,#412);
+#410 = CARTESIAN_POINT('',(-1.3267E-13,-597.5,-12.5));
+#411 = DIRECTION('',(0.,0.,1.));
+#412 = DIRECTION('',(-2.2E-16,-1.,0.));
+#413 = FACE_BOUND('',#414,.T.);
+#414 = EDGE_LOOP('',(#415));
+#415 = ORIENTED_EDGE('',*,*,#416,.T.);
+#416 = EDGE_CURVE('',#417,#417,#419,.T.);
+#417 = VERTEX_POINT('',#418);
+#418 = CARTESIAN_POINT('',(-1.22E-13,-550.75,-12.5));
+#419 = CIRCLE('',#420,3.25);
+#420 = AXIS2_PLACEMENT_3D('',#421,#422,#423);
+#421 = CARTESIAN_POINT('',(-1.2157E-13,-547.5,-12.5));
+#422 = DIRECTION('',(0.,0.,1.));
+#423 = DIRECTION('',(-2.2E-16,-1.,0.));
+#424 = FACE_BOUND('',#425,.T.);
+#425 = EDGE_LOOP('',(#426));
+#426 = ORIENTED_EDGE('',*,*,#427,.T.);
+#427 = EDGE_CURVE('',#428,#428,#430,.T.);
+#428 = VERTEX_POINT('',#429);
+#429 = CARTESIAN_POINT('',(-1.06E-13,-475.75,-12.5));
+#430 = CIRCLE('',#431,3.25);
+#431 = AXIS2_PLACEMENT_3D('',#432,#433,#434);
+#432 = CARTESIAN_POINT('',(-1.0492E-13,-472.5,-12.5));
+#433 = DIRECTION('',(0.,0.,1.));
+#434 = DIRECTION('',(-2.2E-16,-1.,0.));
+#435 = PLANE('',#436);
+#436 = AXIS2_PLACEMENT_3D('',#437,#438,#439);
+#437 = CARTESIAN_POINT('',(12.5,2.78E-15,-12.5));
+#438 = DIRECTION('',(0.,2.2E-16,-1.));
+#439 = DIRECTION('',(-1.,0.,0.));
+#440 = ADVANCED_FACE('',(#441),#460,.F.);
+#441 = FACE_BOUND('',#442,.F.);
+#442 = EDGE_LOOP('',(#443,#444,#452,#459));
+#443 = ORIENTED_EDGE('',*,*,#119,.F.);
+#444 = ORIENTED_EDGE('',*,*,#445,.T.);
+#445 = EDGE_CURVE('',#120,#446,#448,.T.);
+#446 = VERTEX_POINT('',#447);
+#447 = CARTESIAN_POINT('',(-10.5,-140.75,-2.E-15));
+#448 = LINE('',#449,#450);
+#449 = CARTESIAN_POINT('',(-617.1339684379,-140.75,-1.0578E-13));
+#450 = VECTOR('',#451,1.);
+#451 = DIRECTION('',(1.,-4.4E-16,2.2E-16));
+#452 = ORIENTED_EDGE('',*,*,#453,.T.);
+#453 = EDGE_CURVE('',#446,#446,#454,.T.);
+#454 = CIRCLE('',#455,3.25);
+#455 = AXIS2_PLACEMENT_3D('',#456,#457,#458);
+#456 = CARTESIAN_POINT('',(-10.5,-137.5,2.82E-14));
+#457 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#458 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#459 = ORIENTED_EDGE('',*,*,#445,.F.);
+#460 = CYLINDRICAL_SURFACE('',#461,3.25);
+#461 = AXIS2_PLACEMENT_3D('',#462,#463,#464);
+#462 = CARTESIAN_POINT('',(-617.1339684379,-137.5,-1.065E-13));
+#463 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#464 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#465 = ADVANCED_FACE('',(#466),#485,.F.);
+#466 = FACE_BOUND('',#467,.F.);
+#467 = EDGE_LOOP('',(#468,#469,#477,#484));
+#468 = ORIENTED_EDGE('',*,*,#130,.F.);
+#469 = ORIENTED_EDGE('',*,*,#470,.T.);
+#470 = EDGE_CURVE('',#131,#471,#473,.T.);
+#471 = VERTEX_POINT('',#472);
+#472 = CARTESIAN_POINT('',(-10.5,-65.75,-2.E-15));
+#473 = LINE('',#474,#475);
+#474 = CARTESIAN_POINT('',(-617.1339684379,-65.75,-1.2243E-13));
+#475 = VECTOR('',#476,1.);
+#476 = DIRECTION('',(1.,-4.4E-16,2.2E-16));
+#477 = ORIENTED_EDGE('',*,*,#478,.T.);
+#478 = EDGE_CURVE('',#471,#471,#479,.T.);
+#479 = CIRCLE('',#480,3.25);
+#480 = AXIS2_PLACEMENT_3D('',#481,#482,#483);
+#481 = CARTESIAN_POINT('',(-10.5,-62.5,1.155E-14));
+#482 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#483 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#484 = ORIENTED_EDGE('',*,*,#470,.F.);
+#485 = CYLINDRICAL_SURFACE('',#486,3.25);
+#486 = AXIS2_PLACEMENT_3D('',#487,#488,#489);
+#487 = CARTESIAN_POINT('',(-617.1339684379,-62.5,-1.2315E-13));
+#488 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#489 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#490 = ADVANCED_FACE('',(#491),#510,.F.);
+#491 = FACE_BOUND('',#492,.F.);
+#492 = EDGE_LOOP('',(#493,#494,#502,#509));
+#493 = ORIENTED_EDGE('',*,*,#141,.F.);
+#494 = ORIENTED_EDGE('',*,*,#495,.T.);
+#495 = EDGE_CURVE('',#142,#496,#498,.T.);
+#496 = VERTEX_POINT('',#497);
+#497 = CARTESIAN_POINT('',(-10.5,-15.75,-2.E-15));
+#498 = LINE('',#499,#500);
+#499 = CARTESIAN_POINT('',(-617.1339684379,-15.75,-1.3353E-13));
+#500 = VECTOR('',#501,1.);
+#501 = DIRECTION('',(1.,-4.4E-16,2.2E-16));
+#502 = ORIENTED_EDGE('',*,*,#503,.T.);
+#503 = EDGE_CURVE('',#496,#496,#504,.T.);
+#504 = CIRCLE('',#505,3.25);
+#505 = AXIS2_PLACEMENT_3D('',#506,#507,#508);
+#506 = CARTESIAN_POINT('',(-10.5,-12.5,4.4E-16));
+#507 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#508 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#509 = ORIENTED_EDGE('',*,*,#495,.F.);
+#510 = CYLINDRICAL_SURFACE('',#511,3.25);
+#511 = AXIS2_PLACEMENT_3D('',#512,#513,#514);
+#512 = CARTESIAN_POINT('',(-617.1339684379,-12.5,-1.3426E-13));
+#513 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#514 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#515 = ADVANCED_FACE('',(#516,#532,#535,#538),#541,.F.);
+#516 = FACE_BOUND('',#517,.F.);
+#517 = EDGE_LOOP('',(#518,#524,#525,#531));
+#518 = ORIENTED_EDGE('',*,*,#519,.T.);
+#519 = EDGE_CURVE('',#177,#235,#520,.T.);
+#520 = LINE('',#521,#522);
+#521 = CARTESIAN_POINT('',(-10.5,-2.33E-15,10.5));
+#522 = VECTOR('',#523,1.);
+#523 = DIRECTION('',(0.,-1.,-2.2E-16));
+#524 = ORIENTED_EDGE('',*,*,#234,.T.);
+#525 = ORIENTED_EDGE('',*,*,#526,.F.);
+#526 = EDGE_CURVE('',#179,#237,#527,.T.);
+#527 = LINE('',#528,#529);
+#528 = CARTESIAN_POINT('',(10.5,-2.33E-15,10.5));
+#529 = VECTOR('',#530,1.);
+#530 = DIRECTION('',(0.,-1.,-2.2E-16));
+#531 = ORIENTED_EDGE('',*,*,#176,.F.);
+#532 = FACE_BOUND('',#533,.F.);
+#533 = EDGE_LOOP('',(#534));
+#534 = ORIENTED_EDGE('',*,*,#333,.F.);
+#535 = FACE_BOUND('',#536,.F.);
+#536 = EDGE_LOOP('',(#537));
+#537 = ORIENTED_EDGE('',*,*,#358,.F.);
+#538 = FACE_BOUND('',#539,.F.);
+#539 = EDGE_LOOP('',(#540));
+#540 = ORIENTED_EDGE('',*,*,#383,.F.);
+#541 = PLANE('',#542);
+#542 = AXIS2_PLACEMENT_3D('',#543,#544,#545);
+#543 = CARTESIAN_POINT('',(-10.5,-2.33E-15,10.5));
+#544 = DIRECTION('',(0.,-2.2E-16,1.));
+#545 = DIRECTION('',(1.,0.,0.));
+#546 = ADVANCED_FACE('',(#547,#558,#569,#580),#591,.F.);
+#547 = FACE_BOUND('',#548,.F.);
+#548 = EDGE_LOOP('',(#549,#550,#551,#557));
+#549 = ORIENTED_EDGE('',*,*,#526,.T.);
+#550 = ORIENTED_EDGE('',*,*,#244,.T.);
+#551 = ORIENTED_EDGE('',*,*,#552,.F.);
+#552 = EDGE_CURVE('',#187,#245,#553,.T.);
+#553 = LINE('',#554,#555);
+#554 = CARTESIAN_POINT('',(10.5,2.33E-15,-10.5));
+#555 = VECTOR('',#556,1.);
+#556 = DIRECTION('',(0.,-1.,-2.2E-16));
+#557 = ORIENTED_EDGE('',*,*,#186,.F.);
+#558 = FACE_BOUND('',#559,.F.);
+#559 = EDGE_LOOP('',(#560));
+#560 = ORIENTED_EDGE('',*,*,#561,.T.);
+#561 = EDGE_CURVE('',#562,#562,#564,.T.);
+#562 = VERTEX_POINT('',#563);
+#563 = CARTESIAN_POINT('',(10.5,-140.75,2.E-15));
+#564 = CIRCLE('',#565,3.25);
+#565 = AXIS2_PLACEMENT_3D('',#566,#567,#568);
+#566 = CARTESIAN_POINT('',(10.5,-137.5,3.286E-14));
+#567 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#568 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#569 = FACE_BOUND('',#570,.F.);
+#570 = EDGE_LOOP('',(#571));
+#571 = ORIENTED_EDGE('',*,*,#572,.T.);
+#572 = EDGE_CURVE('',#573,#573,#575,.T.);
+#573 = VERTEX_POINT('',#574);
+#574 = CARTESIAN_POINT('',(10.5,-65.75,2.E-15));
+#575 = CIRCLE('',#576,3.25);
+#576 = AXIS2_PLACEMENT_3D('',#577,#578,#579);
+#577 = CARTESIAN_POINT('',(10.5,-62.5,1.621E-14));
+#578 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#579 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#580 = FACE_BOUND('',#581,.F.);
+#581 = EDGE_LOOP('',(#582));
+#582 = ORIENTED_EDGE('',*,*,#583,.T.);
+#583 = EDGE_CURVE('',#584,#584,#586,.T.);
+#584 = VERTEX_POINT('',#585);
+#585 = CARTESIAN_POINT('',(10.5,-15.75,2.E-15));
+#586 = CIRCLE('',#587,3.25);
+#587 = AXIS2_PLACEMENT_3D('',#588,#589,#590);
+#588 = CARTESIAN_POINT('',(10.5,-12.5,5.11E-15));
+#589 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#590 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#591 = PLANE('',#592);
+#592 = AXIS2_PLACEMENT_3D('',#593,#594,#595);
+#593 = CARTESIAN_POINT('',(10.5,-2.33E-15,10.5));
+#594 = DIRECTION('',(1.,0.,0.));
+#595 = DIRECTION('',(0.,2.2E-16,-1.));
+#596 = ADVANCED_FACE('',(#597,#608,#619,#630),#641,.F.);
+#597 = FACE_BOUND('',#598,.F.);
+#598 = EDGE_LOOP('',(#599,#600,#601,#607));
+#599 = ORIENTED_EDGE('',*,*,#552,.T.);
+#600 = ORIENTED_EDGE('',*,*,#252,.T.);
+#601 = ORIENTED_EDGE('',*,*,#602,.F.);
+#602 = EDGE_CURVE('',#195,#253,#603,.T.);
+#603 = LINE('',#604,#605);
+#604 = CARTESIAN_POINT('',(-10.5,2.33E-15,-10.5));
+#605 = VECTOR('',#606,1.);
+#606 = DIRECTION('',(0.,-1.,-2.2E-16));
+#607 = ORIENTED_EDGE('',*,*,#194,.F.);
+#608 = FACE_BOUND('',#609,.F.);
+#609 = EDGE_LOOP('',(#610));
+#610 = ORIENTED_EDGE('',*,*,#611,.T.);
+#611 = EDGE_CURVE('',#612,#612,#614,.T.);
+#612 = VERTEX_POINT('',#613);
+#613 = CARTESIAN_POINT('',(-1.33E-13,-600.75,-10.5));
+#614 = CIRCLE('',#615,3.25);
+#615 = AXIS2_PLACEMENT_3D('',#616,#617,#618);
+#616 = CARTESIAN_POINT('',(-1.3267E-13,-597.5,-10.5));
+#617 = DIRECTION('',(0.,0.,1.));
+#618 = DIRECTION('',(-2.2E-16,-1.,0.));
+#619 = FACE_BOUND('',#620,.F.);
+#620 = EDGE_LOOP('',(#621));
+#621 = ORIENTED_EDGE('',*,*,#622,.T.);
+#622 = EDGE_CURVE('',#623,#623,#625,.T.);
+#623 = VERTEX_POINT('',#624);
+#624 = CARTESIAN_POINT('',(-1.22E-13,-550.75,-10.5));
+#625 = CIRCLE('',#626,3.25);
+#626 = AXIS2_PLACEMENT_3D('',#627,#628,#629);
+#627 = CARTESIAN_POINT('',(-1.2157E-13,-547.5,-10.5));
+#628 = DIRECTION('',(0.,0.,1.));
+#629 = DIRECTION('',(-2.2E-16,-1.,0.));
+#630 = FACE_BOUND('',#631,.F.);
+#631 = EDGE_LOOP('',(#632));
+#632 = ORIENTED_EDGE('',*,*,#633,.T.);
+#633 = EDGE_CURVE('',#634,#634,#636,.T.);
+#634 = VERTEX_POINT('',#635);
+#635 = CARTESIAN_POINT('',(-1.06E-13,-475.75,-10.5));
+#636 = CIRCLE('',#637,3.25);
+#637 = AXIS2_PLACEMENT_3D('',#638,#639,#640);
+#638 = CARTESIAN_POINT('',(-1.0492E-13,-472.5,-10.5));
+#639 = DIRECTION('',(0.,0.,1.));
+#640 = DIRECTION('',(-2.2E-16,-1.,0.));
+#641 = PLANE('',#642);
+#642 = AXIS2_PLACEMENT_3D('',#643,#644,#645);
+#643 = CARTESIAN_POINT('',(10.5,2.33E-15,-10.5));
+#644 = DIRECTION('',(0.,2.2E-16,-1.));
+#645 = DIRECTION('',(-1.,0.,0.));
+#646 = ADVANCED_FACE('',(#647,#653,#656,#659),#662,.F.);
+#647 = FACE_BOUND('',#648,.F.);
+#648 = EDGE_LOOP('',(#649,#650,#651,#652));
+#649 = ORIENTED_EDGE('',*,*,#602,.T.);
+#650 = ORIENTED_EDGE('',*,*,#260,.T.);
+#651 = ORIENTED_EDGE('',*,*,#519,.F.);
+#652 = ORIENTED_EDGE('',*,*,#202,.F.);
+#653 = FACE_BOUND('',#654,.F.);
+#654 = EDGE_LOOP('',(#655));
+#655 = ORIENTED_EDGE('',*,*,#453,.F.);
+#656 = FACE_BOUND('',#657,.F.);
+#657 = EDGE_LOOP('',(#658));
+#658 = ORIENTED_EDGE('',*,*,#478,.F.);
+#659 = FACE_BOUND('',#660,.F.);
+#660 = EDGE_LOOP('',(#661));
+#661 = ORIENTED_EDGE('',*,*,#503,.F.);
+#662 = PLANE('',#663);
+#663 = AXIS2_PLACEMENT_3D('',#664,#665,#666);
+#664 = CARTESIAN_POINT('',(-10.5,2.33E-15,-10.5));
+#665 = DIRECTION('',(-1.,0.,0.));
+#666 = DIRECTION('',(0.,-2.2E-16,1.));
+#667 = ADVANCED_FACE('',(#668),#679,.F.);
+#668 = FACE_BOUND('',#669,.F.);
+#669 = EDGE_LOOP('',(#670,#671,#677,#678));
+#670 = ORIENTED_EDGE('',*,*,#561,.F.);
+#671 = ORIENTED_EDGE('',*,*,#672,.T.);
+#672 = EDGE_CURVE('',#562,#286,#673,.T.);
+#673 = LINE('',#674,#675);
+#674 = CARTESIAN_POINT('',(-617.1339684379,-140.75,-1.0578E-13));
+#675 = VECTOR('',#676,1.);
+#676 = DIRECTION('',(1.,-4.4E-16,2.2E-16));
+#677 = ORIENTED_EDGE('',*,*,#285,.T.);
+#678 = ORIENTED_EDGE('',*,*,#672,.F.);
+#679 = CYLINDRICAL_SURFACE('',#680,3.25);
+#680 = AXIS2_PLACEMENT_3D('',#681,#682,#683);
+#681 = CARTESIAN_POINT('',(-617.1339684379,-137.5,-1.065E-13));
+#682 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#683 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#684 = ADVANCED_FACE('',(#685),#696,.F.);
+#685 = FACE_BOUND('',#686,.F.);
+#686 = EDGE_LOOP('',(#687,#688,#694,#695));
+#687 = ORIENTED_EDGE('',*,*,#572,.F.);
+#688 = ORIENTED_EDGE('',*,*,#689,.T.);
+#689 = EDGE_CURVE('',#573,#297,#690,.T.);
+#690 = LINE('',#691,#692);
+#691 = CARTESIAN_POINT('',(-617.1339684379,-65.75,-1.2243E-13));
+#692 = VECTOR('',#693,1.);
+#693 = DIRECTION('',(1.,-4.4E-16,2.2E-16));
+#694 = ORIENTED_EDGE('',*,*,#296,.T.);
+#695 = ORIENTED_EDGE('',*,*,#689,.F.);
+#696 = CYLINDRICAL_SURFACE('',#697,3.25);
+#697 = AXIS2_PLACEMENT_3D('',#698,#699,#700);
+#698 = CARTESIAN_POINT('',(-617.1339684379,-62.5,-1.2315E-13));
+#699 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#700 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#701 = ADVANCED_FACE('',(#702),#713,.F.);
+#702 = FACE_BOUND('',#703,.F.);
+#703 = EDGE_LOOP('',(#704,#705,#711,#712));
+#704 = ORIENTED_EDGE('',*,*,#583,.F.);
+#705 = ORIENTED_EDGE('',*,*,#706,.T.);
+#706 = EDGE_CURVE('',#584,#308,#707,.T.);
+#707 = LINE('',#708,#709);
+#708 = CARTESIAN_POINT('',(-617.1339684379,-15.75,-1.3353E-13));
+#709 = VECTOR('',#710,1.);
+#710 = DIRECTION('',(1.,-4.4E-16,2.2E-16));
+#711 = ORIENTED_EDGE('',*,*,#307,.T.);
+#712 = ORIENTED_EDGE('',*,*,#706,.F.);
+#713 = CYLINDRICAL_SURFACE('',#714,3.25);
+#714 = AXIS2_PLACEMENT_3D('',#715,#716,#717);
+#715 = CARTESIAN_POINT('',(-617.1339684379,-12.5,-1.3426E-13));
+#716 = DIRECTION('',(-1.,4.4E-16,-2.2E-16));
+#717 = DIRECTION('',(-4.4E-16,-1.,2.2E-16));
+#718 = ADVANCED_FACE('',(#719),#730,.F.);
+#719 = FACE_BOUND('',#720,.F.);
+#720 = EDGE_LOOP('',(#721,#722,#728,#729));
+#721 = ORIENTED_EDGE('',*,*,#611,.F.);
+#722 = ORIENTED_EDGE('',*,*,#723,.T.);
+#723 = EDGE_CURVE('',#612,#406,#724,.T.);
+#724 = LINE('',#725,#726);
+#725 = CARTESIAN_POINT('',(-1.3339E-13,-600.75,617.13396843797));
+#726 = VECTOR('',#727,1.);
+#727 = DIRECTION('',(0.,0.,-1.));
+#728 = ORIENTED_EDGE('',*,*,#405,.T.);
+#729 = ORIENTED_EDGE('',*,*,#723,.F.);
+#730 = CYLINDRICAL_SURFACE('',#731,3.25);
+#731 = AXIS2_PLACEMENT_3D('',#732,#733,#734);
+#732 = CARTESIAN_POINT('',(-1.3267E-13,-597.5,617.13396843797));
+#733 = DIRECTION('',(0.,0.,1.));
+#734 = DIRECTION('',(-2.2E-16,-1.,0.));
+#735 = ADVANCED_FACE('',(#736),#747,.F.);
+#736 = FACE_BOUND('',#737,.F.);
+#737 = EDGE_LOOP('',(#738,#739,#745,#746));
+#738 = ORIENTED_EDGE('',*,*,#622,.F.);
+#739 = ORIENTED_EDGE('',*,*,#740,.T.);
+#740 = EDGE_CURVE('',#623,#417,#741,.T.);
+#741 = LINE('',#742,#743);
+#742 = CARTESIAN_POINT('',(-1.2229E-13,-550.75,617.13396843797));
+#743 = VECTOR('',#744,1.);
+#744 = DIRECTION('',(0.,0.,-1.));
+#745 = ORIENTED_EDGE('',*,*,#416,.T.);
+#746 = ORIENTED_EDGE('',*,*,#740,.F.);
+#747 = CYLINDRICAL_SURFACE('',#748,3.25);
+#748 = AXIS2_PLACEMENT_3D('',#749,#750,#751);
+#749 = CARTESIAN_POINT('',(-1.2157E-13,-547.5,617.13396843797));
+#750 = DIRECTION('',(0.,0.,1.));
+#751 = DIRECTION('',(-2.2E-16,-1.,0.));
+#752 = ADVANCED_FACE('',(#753),#764,.F.);
+#753 = FACE_BOUND('',#754,.F.);
+#754 = EDGE_LOOP('',(#755,#756,#762,#763));
+#755 = ORIENTED_EDGE('',*,*,#633,.F.);
+#756 = ORIENTED_EDGE('',*,*,#757,.T.);
+#757 = EDGE_CURVE('',#634,#428,#758,.T.);
+#758 = LINE('',#759,#760);
+#759 = CARTESIAN_POINT('',(-1.0564E-13,-475.75,617.13396843797));
+#760 = VECTOR('',#761,1.);
+#761 = DIRECTION('',(0.,0.,-1.));
+#762 = ORIENTED_EDGE('',*,*,#427,.T.);
+#763 = ORIENTED_EDGE('',*,*,#757,.F.);
+#764 = CYLINDRICAL_SURFACE('',#765,3.25);
+#765 = AXIS2_PLACEMENT_3D('',#766,#767,#768);
+#766 = CARTESIAN_POINT('',(-1.0492E-13,-472.5,617.13396843797));
+#767 = DIRECTION('',(0.,0.,1.));
+#768 = DIRECTION('',(-2.2E-16,-1.,0.));
+#769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#773)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#770,#771,#772)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#770 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#771 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#772 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#773 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#770,
+  'distance_accuracy_value','confusion accuracy');
+#774 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));
+#775 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#776)
+  ,#769);
+#776 = STYLED_ITEM('color',(#777),#15);
+#777 = PRESENTATION_STYLE_ASSIGNMENT((#778,#784));
+#778 = SURFACE_STYLE_USAGE(.BOTH.,#779);
+#779 = SURFACE_SIDE_STYLE('',(#780));
+#780 = SURFACE_STYLE_FILL_AREA(#781);
+#781 = FILL_AREA_STYLE('',(#782));
+#782 = FILL_AREA_STYLE_COLOUR('',#783);
+#783 = COLOUR_RGB('',0.800000010877,0.800000010877,0.800000010877);
+#784 = CURVE_STYLE('',#785,POSITIVE_LENGTH_MEASURE(0.1),#786);
+#785 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+#786 = COLOUR_RGB('',9.803921802644E-02,9.803921802644E-02,
+  9.803921802644E-02);
+ENDSEC;
+END-ISO-10303-21;

dist/STEP/tubes/M101.step

@@ -0,0 +1,493 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME('Open CASCADE Shape Model','2025-04-26T10:01:53',('Author'),(
+    ''),'Open CASCADE STEP processor 7.6','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('international standard',
+  'automotive_design',2000,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('M101','M101','',(#8));
+#8 = PRODUCT_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#457);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.,0.,0.));
+#13 = DIRECTION('',(0.,0.,1.));
+#14 = DIRECTION('',(1.,0.,-0.));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#68,#110,#168,#226,#254,#279,#302,#327,#352,
+    #380,#408,#423,#440));
+#17 = ADVANCED_FACE('',(#18,#52),#63,.F.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20,#30,#38,#46));
+#20 = ORIENTED_EDGE('',*,*,#21,.T.);
+#21 = EDGE_CURVE('',#22,#24,#26,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(-3.E-15,-12.5,12.5));
+#24 = VERTEX_POINT('',#25);
+#25 = CARTESIAN_POINT('',(-85.,-12.5,12.5));
+#26 = LINE('',#27,#28);
+#27 = CARTESIAN_POINT('',(-8.33E-15,-12.5,12.5));
+#28 = VECTOR('',#29,1.);
+#29 = DIRECTION('',(-1.,2.2E-16,-5.E-16));
+#30 = ORIENTED_EDGE('',*,*,#31,.T.);
+#31 = EDGE_CURVE('',#24,#32,#34,.T.);
+#32 = VERTEX_POINT('',#33);
+#33 = CARTESIAN_POINT('',(-85.,12.5,12.5));
+#34 = LINE('',#35,#36);
+#35 = CARTESIAN_POINT('',(-85.,-12.5,12.5));
+#36 = VECTOR('',#37,1.);
+#37 = DIRECTION('',(2.2E-16,1.,2.2E-16));
+#38 = ORIENTED_EDGE('',*,*,#39,.F.);
+#39 = EDGE_CURVE('',#40,#32,#42,.T.);
+#40 = VERTEX_POINT('',#41);
+#41 = CARTESIAN_POINT('',(3.E-15,12.5,12.5));
+#42 = LINE('',#43,#44);
+#43 = CARTESIAN_POINT('',(2.77E-15,12.5,12.5));
+#44 = VECTOR('',#45,1.);
+#45 = DIRECTION('',(-1.,2.2E-16,-5.E-16));
+#46 = ORIENTED_EDGE('',*,*,#47,.F.);
+#47 = EDGE_CURVE('',#22,#40,#48,.T.);
+#48 = LINE('',#49,#50);
+#49 = CARTESIAN_POINT('',(0.,-12.5,12.5));
+#50 = VECTOR('',#51,1.);
+#51 = DIRECTION('',(2.2E-16,1.,2.2E-16));
+#52 = FACE_BOUND('',#53,.F.);
+#53 = EDGE_LOOP('',(#54));
+#54 = ORIENTED_EDGE('',*,*,#55,.F.);
+#55 = EDGE_CURVE('',#56,#56,#58,.T.);
+#56 = VERTEX_POINT('',#57);
+#57 = CARTESIAN_POINT('',(-15.75,2.E-15,12.5));
+#58 = CIRCLE('',#59,3.25);
+#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62);
+#60 = CARTESIAN_POINT('',(-12.5,-1.032E-14,12.5));
+#61 = DIRECTION('',(2.3E-16,2.E-16,-1.));
+#62 = DIRECTION('',(-1.,2.E-16,-2.3E-16));
+#63 = PLANE('',#64);
+#64 = AXIS2_PLACEMENT_3D('',#65,#66,#67);
+#65 = CARTESIAN_POINT('',(-8.33E-15,-12.5,12.5));
+#66 = DIRECTION('',(6.E-17,-6.6E-16,-1.));
+#67 = DIRECTION('',(4.4E-16,1.,-6.6E-16));
+#68 = ADVANCED_FACE('',(#69,#94),#105,.F.);
+#69 = FACE_BOUND('',#70,.F.);
+#70 = EDGE_LOOP('',(#71,#81,#87,#88));
+#71 = ORIENTED_EDGE('',*,*,#72,.T.);
+#72 = EDGE_CURVE('',#73,#75,#77,.T.);
+#73 = VERTEX_POINT('',#74);
+#74 = CARTESIAN_POINT('',(-3.E-15,-12.5,-12.5));
+#75 = VERTEX_POINT('',#76);
+#76 = CARTESIAN_POINT('',(-85.,-12.5,-12.5));
+#77 = LINE('',#78,#79);
+#78 = CARTESIAN_POINT('',(-2.77E-15,-12.5,-12.5));
+#79 = VECTOR('',#80,1.);
+#80 = DIRECTION('',(-1.,2.2E-16,-5.E-16));
+#81 = ORIENTED_EDGE('',*,*,#82,.T.);
+#82 = EDGE_CURVE('',#75,#24,#83,.T.);
+#83 = LINE('',#84,#85);
+#84 = CARTESIAN_POINT('',(-85.,-12.5,-12.5));
+#85 = VECTOR('',#86,1.);
+#86 = DIRECTION('',(2.2E-16,2.2E-16,1.));
+#87 = ORIENTED_EDGE('',*,*,#21,.F.);
+#88 = ORIENTED_EDGE('',*,*,#89,.F.);
+#89 = EDGE_CURVE('',#73,#22,#90,.T.);
+#90 = LINE('',#91,#92);
+#91 = CARTESIAN_POINT('',(-5.55E-15,-12.5,-12.5));
+#92 = VECTOR('',#93,1.);
+#93 = DIRECTION('',(2.2E-16,2.2E-16,1.));
+#94 = FACE_BOUND('',#95,.F.);
+#95 = EDGE_LOOP('',(#96));
+#96 = ORIENTED_EDGE('',*,*,#97,.F.);
+#97 = EDGE_CURVE('',#98,#98,#100,.T.);
+#98 = VERTEX_POINT('',#99);
+#99 = CARTESIAN_POINT('',(-75.75,-12.5,-2.E-14));
+#100 = CIRCLE('',#101,3.25);
+#101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);
+#102 = CARTESIAN_POINT('',(-72.5,-12.5,-8.55E-15));
+#103 = DIRECTION('',(1.E-17,1.,0.));
+#104 = DIRECTION('',(-1.,1.E-17,-2.2E-16));
+#105 = PLANE('',#106);
+#106 = AXIS2_PLACEMENT_3D('',#107,#108,#109);
+#107 = CARTESIAN_POINT('',(-2.77E-15,-12.5,-12.5));
+#108 = DIRECTION('',(6.6E-16,1.,0.));
+#109 = DIRECTION('',(-2.2E-16,1.452E-31,1.));
+#110 = ADVANCED_FACE('',(#111,#129),#163,.T.);
+#111 = FACE_BOUND('',#112,.F.);
+#112 = EDGE_LOOP('',(#113,#114,#122,#128));
+#113 = ORIENTED_EDGE('',*,*,#47,.T.);
+#114 = ORIENTED_EDGE('',*,*,#115,.T.);
+#115 = EDGE_CURVE('',#40,#116,#118,.T.);
+#116 = VERTEX_POINT('',#117);
+#117 = CARTESIAN_POINT('',(3.E-15,12.5,-12.5));
+#118 = LINE('',#119,#120);
+#119 = CARTESIAN_POINT('',(5.55E-15,12.5,12.5));
+#120 = VECTOR('',#121,1.);
+#121 = DIRECTION('',(-2.2E-16,-2.2E-16,-1.));
+#122 = ORIENTED_EDGE('',*,*,#123,.T.);
+#123 = EDGE_CURVE('',#116,#73,#124,.T.);
+#124 = LINE('',#125,#126);
+#125 = CARTESIAN_POINT('',(0.,12.5,-12.5));
+#126 = VECTOR('',#127,1.);
+#127 = DIRECTION('',(-2.2E-16,-1.,-2.2E-16));
+#128 = ORIENTED_EDGE('',*,*,#89,.T.);
+#129 = FACE_BOUND('',#130,.T.);
+#130 = EDGE_LOOP('',(#131,#141,#149,#157));
+#131 = ORIENTED_EDGE('',*,*,#132,.T.);
+#132 = EDGE_CURVE('',#133,#135,#137,.T.);
+#133 = VERTEX_POINT('',#134);
+#134 = CARTESIAN_POINT('',(-2.E-15,-10.5,10.5));
+#135 = VERTEX_POINT('',#136);
+#136 = CARTESIAN_POINT('',(2.E-15,10.5,10.5));
+#137 = LINE('',#138,#139);
+#138 = CARTESIAN_POINT('',(0.,-10.5,10.5));
+#139 = VECTOR('',#140,1.);
+#140 = DIRECTION('',(2.2E-16,1.,2.2E-16));
+#141 = ORIENTED_EDGE('',*,*,#142,.T.);
+#142 = EDGE_CURVE('',#135,#143,#145,.T.);
+#143 = VERTEX_POINT('',#144);
+#144 = CARTESIAN_POINT('',(2.E-15,10.5,-10.5));
+#145 = LINE('',#146,#147);
+#146 = CARTESIAN_POINT('',(4.66E-15,10.5,10.5));
+#147 = VECTOR('',#148,1.);
+#148 = DIRECTION('',(-2.2E-16,-2.2E-16,-1.));
+#149 = ORIENTED_EDGE('',*,*,#150,.T.);
+#150 = EDGE_CURVE('',#143,#151,#153,.T.);
+#151 = VERTEX_POINT('',#152);
+#152 = CARTESIAN_POINT('',(-2.E-15,-10.5,-10.5));
+#153 = LINE('',#154,#155);
+#154 = CARTESIAN_POINT('',(0.,10.5,-10.5));
+#155 = VECTOR('',#156,1.);
+#156 = DIRECTION('',(-2.2E-16,-1.,-2.2E-16));
+#157 = ORIENTED_EDGE('',*,*,#158,.T.);
+#158 = EDGE_CURVE('',#151,#133,#159,.T.);
+#159 = LINE('',#160,#161);
+#160 = CARTESIAN_POINT('',(-4.66E-15,-10.5,-10.5));
+#161 = VECTOR('',#162,1.);
+#162 = DIRECTION('',(2.2E-16,2.2E-16,1.));
+#163 = PLANE('',#164);
+#164 = AXIS2_PLACEMENT_3D('',#165,#166,#167);
+#165 = CARTESIAN_POINT('',(0.,0.,0.));
+#166 = DIRECTION('',(1.,0.,4.4E-16));
+#167 = DIRECTION('',(-4.4E-16,2.2E-16,1.));
+#168 = ADVANCED_FACE('',(#169,#187),#221,.F.);
+#169 = FACE_BOUND('',#170,.T.);
+#170 = EDGE_LOOP('',(#171,#172,#180,#186));
+#171 = ORIENTED_EDGE('',*,*,#31,.T.);
+#172 = ORIENTED_EDGE('',*,*,#173,.T.);
+#173 = EDGE_CURVE('',#32,#174,#176,.T.);
+#174 = VERTEX_POINT('',#175);
+#175 = CARTESIAN_POINT('',(-85.,12.5,-12.5));
+#176 = LINE('',#177,#178);
+#177 = CARTESIAN_POINT('',(-85.,12.5,12.5));
+#178 = VECTOR('',#179,1.);
+#179 = DIRECTION('',(-2.2E-16,-2.2E-16,-1.));
+#180 = ORIENTED_EDGE('',*,*,#181,.T.);
+#181 = EDGE_CURVE('',#174,#75,#182,.T.);
+#182 = LINE('',#183,#184);
+#183 = CARTESIAN_POINT('',(-85.,12.5,-12.5));
+#184 = VECTOR('',#185,1.);
+#185 = DIRECTION('',(-2.2E-16,-1.,-2.2E-16));
+#186 = ORIENTED_EDGE('',*,*,#82,.T.);
+#187 = FACE_BOUND('',#188,.F.);
+#188 = EDGE_LOOP('',(#189,#199,#207,#215));
+#189 = ORIENTED_EDGE('',*,*,#190,.T.);
+#190 = EDGE_CURVE('',#191,#193,#195,.T.);
+#191 = VERTEX_POINT('',#192);
+#192 = CARTESIAN_POINT('',(-85.,-10.5,10.5));
+#193 = VERTEX_POINT('',#194);
+#194 = CARTESIAN_POINT('',(-85.,10.5,10.5));
+#195 = LINE('',#196,#197);
+#196 = CARTESIAN_POINT('',(-85.,-10.5,10.5));
+#197 = VECTOR('',#198,1.);
+#198 = DIRECTION('',(2.2E-16,1.,2.2E-16));
+#199 = ORIENTED_EDGE('',*,*,#200,.T.);
+#200 = EDGE_CURVE('',#193,#201,#203,.T.);
+#201 = VERTEX_POINT('',#202);
+#202 = CARTESIAN_POINT('',(-85.,10.5,-10.5));
+#203 = LINE('',#204,#205);
+#204 = CARTESIAN_POINT('',(-85.,10.5,10.5));
+#205 = VECTOR('',#206,1.);
+#206 = DIRECTION('',(-2.2E-16,-2.2E-16,-1.));
+#207 = ORIENTED_EDGE('',*,*,#208,.T.);
+#208 = EDGE_CURVE('',#201,#209,#211,.T.);
+#209 = VERTEX_POINT('',#210);
+#210 = CARTESIAN_POINT('',(-85.,-10.5,-10.5));
+#211 = LINE('',#212,#213);
+#212 = CARTESIAN_POINT('',(-85.,10.5,-10.5));
+#213 = VECTOR('',#214,1.);
+#214 = DIRECTION('',(-2.2E-16,-1.,-2.2E-16));
+#215 = ORIENTED_EDGE('',*,*,#216,.T.);
+#216 = EDGE_CURVE('',#209,#191,#217,.T.);
+#217 = LINE('',#218,#219);
+#218 = CARTESIAN_POINT('',(-85.,-10.5,-10.5));
+#219 = VECTOR('',#220,1.);
+#220 = DIRECTION('',(2.2E-16,2.2E-16,1.));
+#221 = PLANE('',#222);
+#222 = AXIS2_PLACEMENT_3D('',#223,#224,#225);
+#223 = CARTESIAN_POINT('',(-85.,3.8E-14,-7.105427357601E-14));
+#224 = DIRECTION('',(1.,0.,4.4E-16));
+#225 = DIRECTION('',(-4.4E-16,2.2E-16,1.));
+#226 = ADVANCED_FACE('',(#227,#238),#249,.F.);
+#227 = FACE_BOUND('',#228,.F.);
+#228 = EDGE_LOOP('',(#229,#230,#231,#237));
+#229 = ORIENTED_EDGE('',*,*,#39,.T.);
+#230 = ORIENTED_EDGE('',*,*,#173,.T.);
+#231 = ORIENTED_EDGE('',*,*,#232,.F.);
+#232 = EDGE_CURVE('',#116,#174,#233,.T.);
+#233 = LINE('',#234,#235);
+#234 = CARTESIAN_POINT('',(8.33E-15,12.5,-12.5));
+#235 = VECTOR('',#236,1.);
+#236 = DIRECTION('',(-1.,2.2E-16,-5.E-16));
+#237 = ORIENTED_EDGE('',*,*,#115,.F.);
+#238 = FACE_BOUND('',#239,.F.);
+#239 = EDGE_LOOP('',(#240));
+#240 = ORIENTED_EDGE('',*,*,#241,.T.);
+#241 = EDGE_CURVE('',#242,#242,#244,.T.);
+#242 = VERTEX_POINT('',#243);
+#243 = CARTESIAN_POINT('',(-75.75,12.5,-1.4E-14));
+#244 = CIRCLE('',#245,3.25);
+#245 = AXIS2_PLACEMENT_3D('',#246,#247,#248);
+#246 = CARTESIAN_POINT('',(-72.5,12.5,-3.E-15));
+#247 = DIRECTION('',(1.E-17,1.,0.));
+#248 = DIRECTION('',(-1.,1.E-17,-2.2E-16));
+#249 = PLANE('',#250);
+#250 = AXIS2_PLACEMENT_3D('',#251,#252,#253);
+#251 = CARTESIAN_POINT('',(2.77E-15,12.5,12.5));
+#252 = DIRECTION('',(-6.6E-16,-1.,-0.));
+#253 = DIRECTION('',(2.2E-16,-1.452E-31,-1.));
+#254 = ADVANCED_FACE('',(#255),#274,.F.);
+#255 = FACE_BOUND('',#256,.F.);
+#256 = EDGE_LOOP('',(#257,#266,#272,#273));
+#257 = ORIENTED_EDGE('',*,*,#258,.F.);
+#258 = EDGE_CURVE('',#259,#259,#261,.T.);
+#259 = VERTEX_POINT('',#260);
+#260 = CARTESIAN_POINT('',(-15.75,2.E-15,10.5));
+#261 = CIRCLE('',#262,3.25);
+#262 = AXIS2_PLACEMENT_3D('',#263,#264,#265);
+#263 = CARTESIAN_POINT('',(-12.5,-9.92E-15,10.5));
+#264 = DIRECTION('',(2.3E-16,2.E-16,-1.));
+#265 = DIRECTION('',(-1.,2.E-16,-2.3E-16));
+#266 = ORIENTED_EDGE('',*,*,#267,.T.);
+#267 = EDGE_CURVE('',#259,#56,#268,.T.);
+#268 = LINE('',#269,#270);
+#269 = CARTESIAN_POINT('',(-15.75,1.142E-14,-92.98036082958));
+#270 = VECTOR('',#271,1.);
+#271 = DIRECTION('',(-1.2E-16,-9.E-17,1.));
+#272 = ORIENTED_EDGE('',*,*,#55,.T.);
+#273 = ORIENTED_EDGE('',*,*,#267,.F.);
+#274 = CYLINDRICAL_SURFACE('',#275,3.25);
+#275 = AXIS2_PLACEMENT_3D('',#276,#277,#278);
+#276 = CARTESIAN_POINT('',(-12.5,1.077E-14,-92.98036082958));
+#277 = DIRECTION('',(2.3E-16,2.E-16,-1.));
+#278 = DIRECTION('',(-1.,2.E-16,-2.3E-16));
+#279 = ADVANCED_FACE('',(#280,#286),#297,.F.);
+#280 = FACE_BOUND('',#281,.F.);
+#281 = EDGE_LOOP('',(#282,#283,#284,#285));
+#282 = ORIENTED_EDGE('',*,*,#232,.T.);
+#283 = ORIENTED_EDGE('',*,*,#181,.T.);
+#284 = ORIENTED_EDGE('',*,*,#72,.F.);
+#285 = ORIENTED_EDGE('',*,*,#123,.F.);
+#286 = FACE_BOUND('',#287,.F.);
+#287 = EDGE_LOOP('',(#288));
+#288 = ORIENTED_EDGE('',*,*,#289,.T.);
+#289 = EDGE_CURVE('',#290,#290,#292,.T.);
+#290 = VERTEX_POINT('',#291);
+#291 = CARTESIAN_POINT('',(-15.75,4.E-15,-12.5));
+#292 = CIRCLE('',#293,3.25);
+#293 = AXIS2_PLACEMENT_3D('',#294,#295,#296);
+#294 = CARTESIAN_POINT('',(-12.5,-5.32E-15,-12.5));
+#295 = DIRECTION('',(2.3E-16,2.E-16,-1.));
+#296 = DIRECTION('',(-1.,2.E-16,-2.3E-16));
+#297 = PLANE('',#298);
+#298 = AXIS2_PLACEMENT_3D('',#299,#300,#301);
+#299 = CARTESIAN_POINT('',(8.33E-15,12.5,-12.5));
+#300 = DIRECTION('',(-6.E-17,6.6E-16,1.));
+#301 = DIRECTION('',(-4.4E-16,-1.,6.6E-16));
+#302 = ADVANCED_FACE('',(#303),#322,.F.);
+#303 = FACE_BOUND('',#304,.F.);
+#304 = EDGE_LOOP('',(#305,#314,#320,#321));
+#305 = ORIENTED_EDGE('',*,*,#306,.F.);
+#306 = EDGE_CURVE('',#307,#307,#309,.T.);
+#307 = VERTEX_POINT('',#308);
+#308 = CARTESIAN_POINT('',(-75.75,-10.5,-1.9E-14));
+#309 = CIRCLE('',#310,3.25);
+#310 = AXIS2_PLACEMENT_3D('',#311,#312,#313);
+#311 = CARTESIAN_POINT('',(-72.5,-10.5,-8.11E-15));
+#312 = DIRECTION('',(1.E-17,1.,0.));
+#313 = DIRECTION('',(-1.,1.E-17,-2.2E-16));
+#314 = ORIENTED_EDGE('',*,*,#315,.T.);
+#315 = EDGE_CURVE('',#307,#98,#316,.T.);
+#316 = LINE('',#317,#318);
+#317 = CARTESIAN_POINT('',(-75.75,92.980360829586,1.415E-14));
+#318 = VECTOR('',#319,1.);
+#319 = DIRECTION('',(-3.4E-16,-1.,-3.3E-16));
+#320 = ORIENTED_EDGE('',*,*,#97,.T.);
+#321 = ORIENTED_EDGE('',*,*,#315,.F.);
+#322 = CYLINDRICAL_SURFACE('',#323,3.25);
+#323 = AXIS2_PLACEMENT_3D('',#324,#325,#326);
+#324 = CARTESIAN_POINT('',(-72.5,92.980360829586,1.487E-14));
+#325 = DIRECTION('',(2.3E-16,1.,2.2E-16));
+#326 = DIRECTION('',(-1.,2.3E-16,-2.2E-16));
+#327 = ADVANCED_FACE('',(#328,#344),#347,.T.);
+#328 = FACE_BOUND('',#329,.T.);
+#329 = EDGE_LOOP('',(#330,#336,#337,#343));
+#330 = ORIENTED_EDGE('',*,*,#331,.T.);
+#331 = EDGE_CURVE('',#133,#191,#332,.T.);
+#332 = LINE('',#333,#334);
+#333 = CARTESIAN_POINT('',(-6.99E-15,-10.5,10.5));
+#334 = VECTOR('',#335,1.);
+#335 = DIRECTION('',(-1.,2.2E-16,-5.E-16));
+#336 = ORIENTED_EDGE('',*,*,#190,.T.);
+#337 = ORIENTED_EDGE('',*,*,#338,.F.);
+#338 = EDGE_CURVE('',#135,#193,#339,.T.);
+#339 = LINE('',#340,#341);
+#340 = CARTESIAN_POINT('',(2.33E-15,10.5,10.5));
+#341 = VECTOR('',#342,1.);
+#342 = DIRECTION('',(-1.,2.2E-16,-5.E-16));
+#343 = ORIENTED_EDGE('',*,*,#132,.F.);
+#344 = FACE_BOUND('',#345,.T.);
+#345 = EDGE_LOOP('',(#346));
+#346 = ORIENTED_EDGE('',*,*,#258,.F.);
+#347 = PLANE('',#348);
+#348 = AXIS2_PLACEMENT_3D('',#349,#350,#351);
+#349 = CARTESIAN_POINT('',(-6.99E-15,-10.5,10.5));
+#350 = DIRECTION('',(6.E-17,-6.6E-16,-1.));
+#351 = DIRECTION('',(4.4E-16,1.,-6.6E-16));
+#352 = ADVANCED_FACE('',(#353,#364),#375,.T.);
+#353 = FACE_BOUND('',#354,.T.);
+#354 = EDGE_LOOP('',(#355,#356,#357,#363));
+#355 = ORIENTED_EDGE('',*,*,#338,.T.);
+#356 = ORIENTED_EDGE('',*,*,#200,.T.);
+#357 = ORIENTED_EDGE('',*,*,#358,.F.);
+#358 = EDGE_CURVE('',#143,#201,#359,.T.);
+#359 = LINE('',#360,#361);
+#360 = CARTESIAN_POINT('',(6.99E-15,10.5,-10.5));
+#361 = VECTOR('',#362,1.);
+#362 = DIRECTION('',(-1.,2.2E-16,-5.E-16));
+#363 = ORIENTED_EDGE('',*,*,#142,.F.);
+#364 = FACE_BOUND('',#365,.T.);
+#365 = EDGE_LOOP('',(#366));
+#366 = ORIENTED_EDGE('',*,*,#367,.T.);
+#367 = EDGE_CURVE('',#368,#368,#370,.T.);
+#368 = VERTEX_POINT('',#369);
+#369 = CARTESIAN_POINT('',(-75.75,10.5,-1.4E-14));
+#370 = CIRCLE('',#371,3.25);
+#371 = AXIS2_PLACEMENT_3D('',#372,#373,#374);
+#372 = CARTESIAN_POINT('',(-72.5,10.5,-3.44E-15));
+#373 = DIRECTION('',(1.E-17,1.,0.));
+#374 = DIRECTION('',(-1.,1.E-17,-2.2E-16));
+#375 = PLANE('',#376);
+#376 = AXIS2_PLACEMENT_3D('',#377,#378,#379);
+#377 = CARTESIAN_POINT('',(2.33E-15,10.5,10.5));
+#378 = DIRECTION('',(-6.6E-16,-1.,-0.));
+#379 = DIRECTION('',(2.2E-16,-1.452E-31,-1.));
+#380 = ADVANCED_FACE('',(#381,#392),#403,.T.);
+#381 = FACE_BOUND('',#382,.T.);
+#382 = EDGE_LOOP('',(#383,#384,#385,#391));
+#383 = ORIENTED_EDGE('',*,*,#358,.T.);
+#384 = ORIENTED_EDGE('',*,*,#208,.T.);
+#385 = ORIENTED_EDGE('',*,*,#386,.F.);
+#386 = EDGE_CURVE('',#151,#209,#387,.T.);
+#387 = LINE('',#388,#389);
+#388 = CARTESIAN_POINT('',(-2.33E-15,-10.5,-10.5));
+#389 = VECTOR('',#390,1.);
+#390 = DIRECTION('',(-1.,2.2E-16,-5.E-16));
+#391 = ORIENTED_EDGE('',*,*,#150,.F.);
+#392 = FACE_BOUND('',#393,.T.);
+#393 = EDGE_LOOP('',(#394));
+#394 = ORIENTED_EDGE('',*,*,#395,.T.);
+#395 = EDGE_CURVE('',#396,#396,#398,.T.);
+#396 = VERTEX_POINT('',#397);
+#397 = CARTESIAN_POINT('',(-15.75,4.E-15,-10.5));
+#398 = CIRCLE('',#399,3.25);
+#399 = AXIS2_PLACEMENT_3D('',#400,#401,#402);
+#400 = CARTESIAN_POINT('',(-12.5,-5.72E-15,-10.5));
+#401 = DIRECTION('',(2.3E-16,2.E-16,-1.));
+#402 = DIRECTION('',(-1.,2.E-16,-2.3E-16));
+#403 = PLANE('',#404);
+#404 = AXIS2_PLACEMENT_3D('',#405,#406,#407);
+#405 = CARTESIAN_POINT('',(6.99E-15,10.5,-10.5));
+#406 = DIRECTION('',(-6.E-17,6.6E-16,1.));
+#407 = DIRECTION('',(-4.4E-16,-1.,6.6E-16));
+#408 = ADVANCED_FACE('',(#409,#415),#418,.T.);
+#409 = FACE_BOUND('',#410,.T.);
+#410 = EDGE_LOOP('',(#411,#412,#413,#414));
+#411 = ORIENTED_EDGE('',*,*,#386,.T.);
+#412 = ORIENTED_EDGE('',*,*,#216,.T.);
+#413 = ORIENTED_EDGE('',*,*,#331,.F.);
+#414 = ORIENTED_EDGE('',*,*,#158,.F.);
+#415 = FACE_BOUND('',#416,.T.);
+#416 = EDGE_LOOP('',(#417));
+#417 = ORIENTED_EDGE('',*,*,#306,.F.);
+#418 = PLANE('',#419);
+#419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);
+#420 = CARTESIAN_POINT('',(-2.33E-15,-10.5,-10.5));
+#421 = DIRECTION('',(6.6E-16,1.,0.));
+#422 = DIRECTION('',(-2.2E-16,1.452E-31,1.));
+#423 = ADVANCED_FACE('',(#424),#435,.F.);
+#424 = FACE_BOUND('',#425,.F.);
+#425 = EDGE_LOOP('',(#426,#427,#433,#434));
+#426 = ORIENTED_EDGE('',*,*,#241,.F.);
+#427 = ORIENTED_EDGE('',*,*,#428,.T.);
+#428 = EDGE_CURVE('',#242,#368,#429,.T.);
+#429 = LINE('',#430,#431);
+#430 = CARTESIAN_POINT('',(-75.75,92.980360829586,1.415E-14));
+#431 = VECTOR('',#432,1.);
+#432 = DIRECTION('',(-3.4E-16,-1.,-3.3E-16));
+#433 = ORIENTED_EDGE('',*,*,#367,.T.);
+#434 = ORIENTED_EDGE('',*,*,#428,.F.);
+#435 = CYLINDRICAL_SURFACE('',#436,3.25);
+#436 = AXIS2_PLACEMENT_3D('',#437,#438,#439);
+#437 = CARTESIAN_POINT('',(-72.5,92.980360829586,1.487E-14));
+#438 = DIRECTION('',(2.3E-16,1.,2.2E-16));
+#439 = DIRECTION('',(-1.,2.3E-16,-2.2E-16));
+#440 = ADVANCED_FACE('',(#441),#452,.F.);
+#441 = FACE_BOUND('',#442,.F.);
+#442 = EDGE_LOOP('',(#443,#444,#450,#451));
+#443 = ORIENTED_EDGE('',*,*,#289,.F.);
+#444 = ORIENTED_EDGE('',*,*,#445,.T.);
+#445 = EDGE_CURVE('',#290,#396,#446,.T.);
+#446 = LINE('',#447,#448);
+#447 = CARTESIAN_POINT('',(-15.75,1.142E-14,-92.98036082958));
+#448 = VECTOR('',#449,1.);
+#449 = DIRECTION('',(-1.2E-16,-9.E-17,1.));
+#450 = ORIENTED_EDGE('',*,*,#395,.T.);
+#451 = ORIENTED_EDGE('',*,*,#445,.F.);
+#452 = CYLINDRICAL_SURFACE('',#453,3.25);
+#453 = AXIS2_PLACEMENT_3D('',#454,#455,#456);
+#454 = CARTESIAN_POINT('',(-12.5,1.077E-14,-92.98036082958));
+#455 = DIRECTION('',(2.3E-16,2.E-16,-1.));
+#456 = DIRECTION('',(-1.,2.E-16,-2.3E-16));
+#457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#461)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#458,#459,#460)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#458 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#459 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#460 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#461 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#458,
+  'distance_accuracy_value','confusion accuracy');
+#462 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));
+#463 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#464)
+  ,#457);
+#464 = STYLED_ITEM('color',(#465),#15);
+#465 = PRESENTATION_STYLE_ASSIGNMENT((#466,#472));
+#466 = SURFACE_STYLE_USAGE(.BOTH.,#467);
+#467 = SURFACE_SIDE_STYLE('',(#468));
+#468 = SURFACE_STYLE_FILL_AREA(#469);
+#469 = FILL_AREA_STYLE('',(#470));
+#470 = FILL_AREA_STYLE_COLOUR('',#471);
+#471 = COLOUR_RGB('',0.800000010877,0.800000010877,0.800000010877);
+#472 = CURVE_STYLE('',#473,POSITIVE_LENGTH_MEASURE(0.1),#474);
+#473 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+#474 = COLOUR_RGB('',9.803921802644E-02,9.803921802644E-02,
+  9.803921802644E-02);
+ENDSEC;
+END-ISO-10303-21;